1 / 8
Kabeldurchführung; Cable entry Solar PV Taunus Pfanne ; f3d-file provided
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cable entry for 6mm² solar cables, leading them between a german 'Taunus' Dachstein and the roof ridge.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 144
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I installed four solar panels on my roof. The cables had to enter beween the roof ridge and the top roof tile. Our roof is covered with "Taunus Dachstein" and I needed a specific cable entry for nine 6mm² solar cables in total. [4 Panel, 1 equipotential bonding]
Be aware, that only 4 of five cables can be fed through my model after the mc4-plug (or something else bigger than the cable itself) was crimped on.
I printed it with TPU and 3-5% inflill.