1 / 8
Kabeldurchführung; Cable entry Solar PV Taunus Pfanne ; f3d-file provided
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A cable entry for 6mm² solar cables, leading them between a german 'Taunus' Dachstein and the roof ridge.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 150
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I installed four solar panels on my roof. The cables had to enter beween the roof ridge and the top roof tile. Our roof is covered with "Taunus Dachstein" and I needed a specific cable entry for nine 6mm² solar cables in total. [4 Panel, 1 equipotential bonding]
Be aware, that only 4 of five cables can be fed through my model after the mc4-plug (or something else bigger than the cable itself) was crimped on.
I printed it with TPU and 3-5% inflill.