P
PrintablesPassforce
FPV PS5/4 Simulator
FPV stick Simulator PS5/4 FPV stick for PS5/PS4 controller. Inspired by Taranis QX7 stick I advise to print with supports on the plate
- Downloads
- 819
- Likes
- 108
- Rating
- 5
Search results: pv
3,711 models
P
Printablesjebowenag79
Q-20 Camera Mount to 1/2 inch PVC Pipe Clamp
Q-20 Camera Mount to 1/2 inch PVC Pipe Clamp This clamp allows mounting a camera or other device onto a nominal 1/2 inch (outside diameter) PVC pipe, widely available in the US. For the camera end, use a quarter-20 threaded bolt, widely…
- Downloads
- 812
- Likes
- 59
- Rating
- 0
P
PrintablesConr8r
Geodesic Greenhouse - Articulating PVC Joints
Introduction This is a concept for greenhouse based upon a geodesic dome using 3D printed articulated joints, PVC pipes, and greenhouse plastic. Unfortunately I don't have the funds at the moment to realize the full concept but the 3D…
- Downloads
- 785
- Likes
- 513
- Rating
- 4
P
Printablest0b1
Hinge for PVC pipe
Hinge for EN20 pipe rods. M5 screw, optional zip tie. We used this to attach a gable to our grow tent , like so: You can easily fix this thing to the EN20 rod with a small screw, if necessary. OpenSCAD files are included for your…
- Downloads
- 460
- Likes
- 129
- Rating
- 0
P
PrintablesTeo_211
M1A2 SEPv3 Abrams Wall Art
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
- Downloads
- 408
- Likes
- 90
- Rating
- 5
P
PrintablesMarkus_p
Mini FPV-Rover (Tank)
This is a mini version of my FPV-Rover V2.0 The dimension are 10cm x 10cm x 3cm Intructions and BOM can be found on Instructables https://www.instructables.com/id/Mini-FPV-Rover/ Videos on Youtube: Print instructions Body: Print body with…
- Downloads
- 402
- Likes
- 92
- Rating
- 5
P
PrintablesJacob2016
2" Sch 40 PVC Blast Gate
This Blast Gate is redesigned to be used with standard 2" Sch 40 PVC DWV pipe (Outside Diameter: 2.375" - Inside Diameter 2.047"). Can be found at most hardware stores. You can assemble with 1/4, M6 or printable bolts as I did. NOTE- The…
- Downloads
- 399
- Likes
- 81
- Rating
- 5
P
PrintablesLogan
DJI FPV Drone Wall Mount
UPDATE: Added Version 2 with updated supports and fillets for improved structural stability. This simple wall mount will showcase your drone on any wall of your choosing. I've done several iterations of this design and this one seems to…
- Downloads
- 329
- Likes
- 32
- Rating
- 0
P
Printableskaje
ShopVac Small Crevice Nozzle - Skinny Version
This is made for ShopVac or any other vacuum which uses a hose with an internal diameter of 1.5 inches (38 mm). I made it specifically to fit into the slots on the base of my drill press, but of course it can be used to reach other hard…
- Downloads
- 302
- Likes
- 43
- Rating
- 5
P
PrintablesMr-J
Simple DJI Digital FPV System Camera Mount
A simple mount for attaching the DJI FPV camera to fixed wing aircraft. Print instructions Category: R/C Vehicles
- Downloads
- 299
- Likes
- 15
- Rating
- 0
P
Printablesnicholaskillin
Ryobi miter saw to shopvac adaptor
My miter saw is the Ryobi TSS103T. The inner diameter of the part that attaches to the miter saw is about 37.9mm (1.5 inches). The outer diameter of the part that attaches to the shopvac hose is 55mm (2 11/64 inches). I had to do just a…
- Downloads
- 291
- Likes
- 42
- Rating
- 5
P
PrintablesVoodooScience
1” PVC Pipe Clip
I created this clip to attach an insect screen onto a 1" PVC pipe frame to block out pests from my garden, but could be used with any thin material. The clips have a handle so they can easily be removed. I printed at a .3mm layer height…
- Downloads
- 280
- Likes
- 43
- Rating
- 0
P
Printableseverythingthatglitters
PVC Pipe End Cap - 1 inch
An end cap I made in TinkerCAD for a 1 inch PVC pipe. Outside diameter is 29 mm and inside diameter is 21 mm. I printed with PLA, 0.20 layer height, 3 walls, and 50% infill using CURA. I just superglued the cap to the end of the pipe to…
- Downloads
- 267
- Likes
- 20
- Rating
- 5
P
PrintablesOKButton
DJI FPV Goggle Antenna Dust Cover/Holder
I have printed with PETG. Tolerances are very close. If it is a tight fit dont get them stuck tho you do have access to the side to ease pushing out and you can get a fingure nail under the lower part if needed. Not tested with V1 antennas.
- Downloads
- 260
- Likes
- 38
- Rating
- 4
P
PrintablesBulletproof_JoeJie
20mm PVC pipe T connctor
I printed in 45 degree of original model, that not easy to break please see the photo I provided. I modified the connector to fit 20mm pipe. It need support Wall: 6 Infill: 20 support: Yes meterials : PLA, PETG is fine -Please post your…
- Downloads
- 224
- Likes
- 14
- Rating
- 0
P
Printablesdjedje_zr7
Score /PV 2 digit counter
You can't go out, so play board game. Use this score or PV counter. Assembly : Use the 3 squares parts to join the two axes (force required) Joint the 2 legs ((force required) Update : Belotte's update : 0-11 Score counter (yellow part)…
- Downloads
- 217
- Likes
- 41
- Rating
- 4.5
P
Printablesszelenka
Beskar Spear from the Mandalorian for 1/2" PVC Riser
Prints in two parts, where they can be glued together. I screwed on the bottom part upside down on the PVC Riser first, then applied superglue around the rim and screwed down the top part. I kept the screwing motion going while the glue…
- Downloads
- 214
- Likes
- 59
- Rating
- 0
P
Printableschixxi
Slim 2x 18650 Case for FPV Goggle
I really love the original design by Drip, especially the minimalistic design, but I personally want my 18650s to be protected slightly better. Thanks @Drip, big fan of your channel! So this is pretty much the same design, just a bit…
- Downloads
- 194
- Likes
- 16
- Rating
- 0
P
PrintablesDot Dot Dash
Dog agility jump parts 1" PVC tubing
Cut 8 pcs 12" long for feet Cut 2 pcs 36" long for posts. Cut 56" pieces for the jump bar. I used hot glue during assembly as well.
- Downloads
- 186
- Likes
- 36
- Rating
- 5
P
PrintablesMicr0wave3
FPV Drone Mount
Have you ever wanted to mount your drone on your backpack, but it was never convenient enough to buy a separate backpack, or buy a mount from amazon? Well now you can put your printer to use and print this amazing mount. All you need are…
- Downloads
- 175
- Likes
- 60
- Rating
- 5
P
PrintablesJohannes
Solar Panel / Module mounting Bracket -- PV Panel / Modul Befestigung
Solar Panel / Module mounting Bracket // PV Panel / Modul Befestigung For 30mm and 35mm aluminium frames Für 30mm und 35mm Alurahmen
- Downloads
- 157
- Likes
- 21
- Rating
- 0
P
PrintablesFour_father
1/2" PVC Pipe Clamp
I created this to hang a large banner on a PVC frame. It is secured with a ¼" bolt and recessed nut. Fusion 360 file included. I printed this with PETG. Most of it is in 0.2 mm layer height. At the top of the pipe circle I used variable…
- Downloads
- 144
- Likes
- 28
- Rating
- 0
P
PrintablesJessie
PVS-14 night vision model
Hello, I used my revopoint pop2 to scan a PVS-14 night vision device. The model has a lot of detail but isn't flawless. I've uploaded the complete model and a cut version. I printed the cut version without any supports and glued it…
- Downloads
- 143
- Likes
- 20
- Rating
- 0
P
PrintablesRazelak
20mm to 30mm mounting adapter plate for fpv drone
A plate to adapt 20mm mounting holes to 30mm, originally used to mount HDZERO freestyle V1 vtx on 20mm mounting holes of an Armattan bobcat frame, as I already had a 30mm fc and esc stack taking up the 30mm mounting holes. the 4 raised…
- Downloads
- 140
- Likes
- 5
- Rating
- 0
P
Printablescomputer1up
Friction-fit cap for 40mm PVC tube (great as a case for posters)
Designed this endcap for PVC tubes to transport posters & D&D maps. Take any old PVC tube, cut it to your desired length, and put these caps on each end! This model is designed for 40mm outer diameter tubes, but you can always just scale…
- Downloads
- 135
- Likes
- 12
- Rating
- 5
P
Printableslienmeat
AKK A11T 5.8G Micro AIO FPV camera mount
I use this mount on my RC planes that need an extremely light weight fpv solution. I use the AKK A11T FPV camera for this, but attaching them to my planes was always pretty janky before I came up with this mount. I used PETG at 0.10 layer…
- Downloads
- 133
- Likes
- 10
- Rating
- 0
P
PrintablesJungleReaver
1 Inch Female to 3/4 Inch Male PVC fitting
Printed in ABS at 100% and it is stronger than the PVC its connecting to. This was used to support a SCROG made of PVC in my grow tent to convert some 1" PVC tubing I had to ¾" to go into a 4-way split. Print Settings: Prusa MK4 0.4mm…
- Downloads
- 132
- Likes
- 8
- Rating
- 5
P
Printablesaubedj
Ryobi Mitre Saw to Dewalt ShopVac Attachment
Connects the vacuum port on a 10" Ryobi sliding mitre saw to the suction hose of a Dewalt shopvac hose for easy clean-up. Includes a 30° bend to keep the hose out of the way when using the saw. Print instructions Print standing up with at…
- Downloads
- 129
- Likes
- 10
- Rating
- 0
P
PrintablesAN
1.5 inch PVC Clip
gcode file using a 0.6mm Nozzle, for PLA, with 2 instances. 40% infill (aligned rectilinear) but can probably reduce as needed. Printed with supports - works well. PLA can warp with heat and sun exposure, recommend running PETG for better…
- Downloads
- 120
- Likes
- 25
- Rating
- 5
P
PrintablesEmiercy
16mm PVC Conduit Holder for flexible and normal conduit
This clamp is designed for 16mm pvc conduits both flexible and rigid ones. Ideal for installing cabling for ceiling lightning. Can be printed in PLA and PETG without issues. It snaps thightly in place and can be removed with some force.…
- Downloads
- 120
- Likes
- 28
- Rating
- 5
P
PrintablesObe_Design
PVC pipe holder 15mm - 20mm
These are 3D-printed PVC pipe mounts, designed to be secured with M3 bolts. They are commonly used in electrical conduit installations and are available in different sizes to fit various pipe diameters. Perfect for mounting pipes to walls…
- Downloads
- 117
- Likes
- 26
- Rating
- 5
P
PrintableswolfCatWorkshop
Magnifying Lens Clip for BetaFPV VR02 FPV Goggles
If you need reading glasses you might have trouble seeing a sharp image on FPV goggles. With this clip you can attach lenses from inexpensive workshop magnifying glass like these (I couldn't find a place to buy just the lenses). Be sure…
- Downloads
- 111
- Likes
- 16
- Rating
- 5
P
PrintablesTrajan
FPV Battery Divider for 30 Caliber Ammo Can
Metal Ammo Cans provide a watertight and somewhat flame resistant storage container for Lipo Batteries (your results may vary). I created this divider to hold 10 1700mah 6s packs upright. The end two dividers will fit even larger packs…
- Downloads
- 104
- Likes
- 30
- Rating
- 5
P
Printableseslacker
Angled Braces for DIY PVC Greenhouse
Over the years, I've built several versions of temporary, cold-weather greenhouses out of PVC pipe and plastic sheeting. This year was no exception, but I did make some improvements this time around. With a piece of PVC pipe and two of…
- Downloads
- 102
- Likes
- 20
- Rating
- 0
P
PrintablesMarkus_p
RC FPV-Trike with rear steering wheel
As I had some spare parts from my first FPV Rover, I decided to build a RC car. But it shouldn't be just a standard RC car. Therefore I've designed a trike with a rear steering wheel. Videos: https://youtu.be/wLeIawSgQNw Intructions and…
- Downloads
- 96
- Likes
- 30
- Rating
- 5
P
PrintablesSascha Curth
PV System Solar Panel - Cover for Extrusion Frames Profile
This will snuggly fit onto 4cm x 4cm extruded frames. The material cost is ~15 cents per cover.
- Downloads
- 96
- Likes
- 15
- Rating
- 5
P
PrintablesMarkus_p
GoPro Mount for the FPV-Rover
This is a GoPro-Mount for the FPV-Rover (V1.0) and for the FPV-Rover (V2.0) Print instructions Print every part with 15%-25% infill No support needed. If you want to mount the GoPro without dampener, you'll need 2x M3 nuts 2x M3x12mm…
- Downloads
- 78
- Likes
- 32
- Rating
- 0
P
PrintablesJesse Figge
2" PVC air cannon projectile
A heavy projectile used in 2" PVC air cannons of the type designed by Germy Ballswell. Be careful not to add supports to the internal cavity. I had good success with grid style supports painted on the bottom of the fin surfaces and bottom…
- Downloads
- 76
- Likes
- 17
- Rating
- 0
P
PrintablesSnoop_cz
Stand for storing 3d printed rc car PV3S
stand for storing 3d printed RC car PV3S against wear of leaf springs height 85mm stojan na uložení 3d tisknuteho rc auta PV3S proti opotřebení listových per výšky 85mm
- Downloads
- 74
- Likes
- 35
- Rating
- 0
P
PrintablesNygaard Design
STRAPVICE (BandClamp) (Parametric) (Fusion360)
Very useful for glueing together lasercut boxes etc. There is Parameters you can edit in the fusion file. Parameters include: Angle, belt width, belt thickness
- Downloads
- 67
- Likes
- 14
- Rating
- 5
P
PrintablesInqEnzo
Dust collection System ducking coupler #2 (6" metal in, Y to 4" metal & 2" PVC out)
This Y coupler for a shop dust collection system fits over a 6" metal ducking pipe. That would be the out side of the air flow (closest to the collector). Then it Ys into a 4" metal ducting pipe & a 2" PVC pipe on the in side of the air…
- Downloads
- 61
- Likes
- 13
- Rating
- 0
P
PrintablesHB9GXS
Prusament/Filament/Spool Shelf using 16mm PVC Pipe
simple spool shelf (storage) using 16mm pvc pipe in an IKEA PAX (100cm), holes for 4mm screws with 8mm heads, add a support every 22cm and you have space for 3 spools in between, 5 supports for a 100cm wide IKEA PAX
- Downloads
- 59
- Likes
- 19
- Rating
- 5
P
Printablesmike
Sears Craftsman Shopvac Hose End
Endpiece from a Sears Craftsman Shop-vac hose used to connect accessories to. The original I had cracked. The outside diameter of the hose end is 2 1/4 inches. taken from https://www.thingiverse.com/thing:357574
- Downloads
- 59
- Likes
- 7
- Rating
- 0
P
PrintablesJPMakesStuff
2in PVC vent screened cover
I needed a way to protect outdoor vents from things getting inserted, I was worried about kids bouncy balls or a water hose, but perhaps more practically this protects from mice or tree berries. After purchasing some stainless steel…
- Downloads
- 58
- Likes
- 25
- Rating
- 0
P
PrintablesCoenW
75mm througwall PVC pipe adapter (110mm endcap to 75mm connector)
Print these two parts in PETG to connect a 75mm PVC drain pipe through a plastic wall. Cut a 60mm hole in the walll, and use PVC glue to glue the 3d printed parts to each other and the wall. I used it to convert a 110mm endcap to a 75mm…
- Downloads
- 58
- Likes
- 8
- Rating
- 0
P
Printablesweirdswiss
Part Collection for Eachine Tyro79 FPV Drone
I present my Eachine Tyro 79 Part collection: Battery Saver, Cameramount, a cute sharkfin, plate on the back and antenna. All parts were made with PLA and high infills. Depends on your flight style;-)
- Downloads
- 53
- Likes
- 9
- Rating
- 0
P
Printablespewchai
Can holder for 4 oz. PVC/ABS/CPVC cements, primers or cleaners.
Those cans are often leaking, when opened and closed a couple of times. This is a way to keep them upright.
- Downloads
- 50
- Likes
- 4
- Rating
- 0
P
PrintablesTheWylieStCoyote
Tormach 440 Coolant drain to 1-1/2" PVC tubing
Coolant drain for tormach 440 factory coolant pan to 1-1/2" PVC tubing.
- Downloads
- 48
- Likes
- 3
- Rating
- 0
P
PrintablesGregE
90mm PVC downpipe mount
Created some mounts for 90mm PVC pipe. Used to mount the pipe to the side of the house and verandah posts. Uses 3/16 inch x 18mm Mushroom head bolts and square nuts. Mount holes for attaching to verandah posts are for 8G Screws or a head…
- Downloads
- 47
- Likes
- 10
- Rating
- 0
P
PrintablesVedanshG
Low-Cost MPCNC (Lowrider v2) MDF Sled & PVC Dust Enclosure
Intro Hi! Thanks for viewing my design! I am a high school student passionate about giving back to the community, if you like what I am doing, feel free to drop a like or a comment! Vedansh Sled I built my MPCNC Lowrider with the intent…
- Downloads
- 41
- Likes
- 22
- Rating
- 0
P
PrintablesBrico Mania 3D
PVC Pool Table/ Rubik Line
Materiales Tubo de PVC de 25mm Tubo de PVC de 32mm Tornillos M3 Tornillos M5 Spray,s de Color (color a convenir) Cola de contacto Metodo de montaje Step 1 Cortar los tubos de PVC de 25 mm diámetro Introduce primero la parte inferior…
- Downloads
- 37
- Likes
- 20
- Rating
- 0
P
PrintablesDmoto Design Labs
PVC Pipe Spool holder
Utilizing a 1-1/2" PVC Pipe to hold multiple spools
- Downloads
- 36
- Likes
- 16
- Rating
- 5
P
PrintablesPesadilla
Wall mount for simple pvc curtain rail
Wall mount for simple pvc curtain rail Print instructions Wall mount for simple pvc curtain rail. Printed in PETG. I included the fusion 360 file if you need to change dimensions.
- Downloads
- 36
- Likes
- 5
- Rating
- 0
P
Printablestechfreek
Rigid r26011 Sander Shopvac (Dewalt DXV09P) Adapter
I recently tried to use my shop vac for dust collection from my sander. While the hose almost fit on the sander, it didn't quite fit. So I designed this part to ensure a solid connection on both sides. Printed vertically in PLA, no…
- Downloads
- 36
- Likes
- 11
- Rating
- 4
P
PrintablesKUMOYUKI
PVC VU 50 and G1-1/4 Connecter
This parts includes: A nut of G1-¼ (41.910mm) a pipe of same size of PVC VU 50 (60mm)
- Downloads
- 34
- Likes
- 3
- Rating
- 0
P
PrintablesPiChaos
Paperlook Vase for PVB prints
A Vase in Paper optic to test the smoothability and transparency of PVB material in combination with a 0.8 nozzle. Tested Prusas Smoky Black PVB Filament. I printed it well with 0.97 mm layer width on a 0.8 Nozzle with 0.5mm Layer height…
- Downloads
- 34
- Likes
- 6
- Rating
- 0
P
Printablesafschuld
Magnetic pipe flange for a 60mm PVC Pipe
This magnetic pipe fitting uses 6mm diameter 3mm high circular magnets to create an easily detachable pipe flange. Useful for exhaust or vacuum hoses for a woodshop. The attached GCode has a stop at 3MM so you can insert the magnets and…
- Downloads
- 26
- Likes
- 9
- Rating
- 0
P
Printablesmakrspacr
PVC Pipe Bracket
Printable wall mount brackets, to use ½" PVC piping to store rolled materials. I used this with a roll of white paper to use as a background for taking pictures of models in my garage. Could use for storing christmas paper over a wrapping…
- Downloads
- 25
- Likes
- 13
- Rating
- 5
P
PrintablesBrico Mania 3D
PVC Pool Lounger / Rubik Line
Materiales Tubo de PVC de 25mm Tubo de PVC de 32mm Tornillos M3 Tornillos M5 Spray,s de Color (color a convenir) Cola de contacto Metodo de montaje Step 1 Cortar los tubos de PVC de 25 mm diámetro a la medida que más te convenga. Te…
- Downloads
- 24
- Likes
- 14
- Rating
- 0
P
PrintablespHiLViO
Adaptateur ShopVac 35mm - 8mm
Cet adaptateur aide pour passer l'aspirateur dans les endroits plus restreints comme à l'intérieur de l'enclosure Prusa. Je suggère le support organique pour cette impression.
- Downloads
- 24
- Likes
- 3
- Rating
- 0
P
PrintablesPeopleware
Gehäuse für MeanWell. LED Netzteil 40W 5V 8A ; MeanWell, LPV-60-5 / Housing for MeanWell switching power supply
Es geht um ein Gehäuse für folgendes Netzteil: https://amzn.to/3Q7t0pd Ich habe mich beim Amazon Partnernet registriert, verdiene daher als Amazon-Partner an qualifizierten Verkäufen und bedanke mich daher, wenn ihr die Links nutzt. Ich…
- Downloads
- 21
- Likes
- 3
- Rating
- 0
P
PrintablesTrillium_Atelier
Make-it-a-Mold Choclifier (1-piece vacuformer for shopvac)
THESE INSTRUCTIONS SHOULD BE FOLLOWED BY ADULTS OR UNDER ADULT SUPERVISION. So there are no good vacuforming rigs out there for 3d printers, probably because you can't make a good vacuforming rig with a 3d printer! You can, however, make…
- Downloads
- 21
- Likes
- 5
- Rating
- 0
P
PrintablesTraincrossin
Hot Dam Minecraft PvP Map by Nadastorm from Overcast Network
PRUSA i3 MK2 1.75mm PLA 20 micron layer height 5% infill No supports 3 skirt loops 4 hours to print
- Downloads
- 21
- Likes
- 5
- Rating
- 0
P
PrintablesJadozub
The Penultimate Sub250 2s 21700 6" FPV drone, printed frame 35 km flight distance & 55 min of endurance!
Mum, look! This battery has a drone! The goal of this project was simple – take two 21700 Li-Ion batteries and build a drone around it, trying to maximize efficiency. This meant a lightweight frame and large propellers, as the batteries…
- Downloads
- 15
- Likes
- 2
- Rating
- 0
P
PrintablesLudo B
Opvullatje-IKEA_HEJNE pootje. Filling slat-IKEA_HEJNE leg.
Om dat de kelder vloer niet perfect waterpas ligt heb ik deze opvullatjes getekend, om onder de pootjes te steken. Er zijn randjes aan om niet te verschuiven. Because the basement floor is not perfectly level, I drew these filler slats to…
- Downloads
- 14
- Likes
- 1
- Rating
- 0
P
PrintablesPr0nting
WEN 6502T benchtop sander shopvac hose fitting
Solid piece or glue-together adapter for 1.25" shopvac hose to connect to Wen benchtop sander for dust collection. Tight fit and looser fit model included, as the tighter fit cracked a bit when the vacuum hose was inserted too forcefully…
- Downloads
- 14
- Likes
- 4
- Rating
- 0
P
Printablescermo
Insta360 handle holder for Seacraft DPV GO!
This model will hold the front part of the extension stick for the underwater camera Insta360 X4/X5 on the DiversPropulsionVehicle Seacraft GO! in it's upper front holder. It has to be secured on the back of the DPV with other holder to…
- Downloads
- 13
- Likes
- 0
- Rating
- 0
P
PrintablesFool3
Plants vs. Zombies (PvZ) - Snow Pea Sculpt
This design captures the iconic frosty look of the lane-slowing plant from the classic game, complete with its back spikes and determined facial expression. Perfect for gaming setups, tabletop decorations, or gifts for PvZ fans. Print…
- Downloads
- 11
- Likes
- 5
- Rating
- 0
P
PrintablesJellyTitan
4 in. x 1-1/2 in. Spigot Hub Flush Bushing for PVC DWV
This bushing allows the insertion of the 1-1/2 pipe into the 4" pipe. The connection is intentionally not glued so that if the 4" in-ground pipe shifts or freezes, the drain waste pipe connection can move up or down. I needed to connect a…
- Downloads
- 8
- Likes
- 1
- Rating
- 0
P
PrintablesRvadrichem
HC32 FPV camera module mount
For work, I needed to turn my RC car into an inspection vehicle. I had a HC32 FPV camera module laying around and only needed a way to mount it onto a piece of wood. The FPV module is secured to the mount using a rubber band. This way…
- Downloads
- 8
- Likes
- 3
- Rating
- 0
P
PrintablesJadozub
Splinter - a lightweight 2" FPV frame with no CNC milling
I was tired of constantly fixing and replacing HappyModel Mobula 8 frames, and while considering some lighter options, I decided to try making one myself. Based on carbon strip construction and printed joiners, similar to my 21700 NLR ,…
- Downloads
- 8
- Likes
- 0
- Rating
- 0
P
PrintablesJadozub
Vertical Tail FPV Pod for Eclipson Hushwing
Designed for Eclipson Hushwing , but should fit many similarly sized models. Fits Caddx Ant Nano camera, HGLRC Zeus Nano FPV transmitter and maximum 4.5 mm diameter antenna for cheap (~$35) and lightweight (~10 g) FPV setup. The camera is…
- Downloads
- 7
- Likes
- 2
- Rating
- 0
P
PrintablesVolodymyr Shvediuk
BETAFPV C03 canopy holder 10°
BETAFPV C03 canopy holder, fit for air65 camera and air 65 FC, 10° printed PETG, weight 2.5g print without support tree
- Downloads
- 6
- Likes
- 0
- Rating
- 0
P
PrintablesLukas
Sensor Holder for KG PVC pipe
Story: We needed to insert a water level sensor into a DN 110 KG PVC pipe for a project. Therefore, I have designed a holder that can hold such a sensor and perfectly aligns with the inner shape of the pipe. You need to drill a hole…
- Downloads
- 5
- Likes
- 1
- Rating
- 0
P
PrintablesAce Makerspace
WEN Dust Port Shopvac Adaptor
This adaptor allows you to connect a 2" shopvac hose to a Wen Oscillating Belt & Spindle Sander (model 6524), which has a 1.5" port. Other tools also have a 1.5" port - it isn't uncommon. This adaptor works great printed in TPU where it…
- Downloads
- 1
- Likes
- 3
- Rating
- 0
P
PrintablesAce Makerspace
Belt Sander Shopvac Adaptor
This adaptor slides onto the dust collection port on a Chicago Electric belt sander. It allows you to connect a shopvac hose to it. There are two tapers you can choose from to accommodate shopvac hoses from 1.5" through 2". You'll find…
- Downloads
- 0
- Likes
- 2
- Rating
- 0
P
PrintablesPeter H
SHOPVAC (50mm) CAMLOCK CONNECTORS WITH MAGNETIC CATCH
Standard 50mm (2inch) vacuum cuffs tend to work loose in use on many tools and are rather bulky, so I was looking for a simple locking system that would be easily adapted to any tool, so that anyone with rudimentary cad skills could…
- Downloads
- 12,275
- Likes
- 7,340
- Rating
- 4.91
P
PrintablesProgrammaDan
Goblin FPV Drone
Note: A larger version of this drone, able to fit a 20x20mm stack is available: The Goblin FPV Drone I worked hard on this little guy. Poured love into every edge and crevice. Spared no mechanical consideration. And what a beautiful…
- Downloads
- 7,909
- Likes
- 1,952
- Rating
- 4.92
P
PrintablesSTRIKING FPV
V3 Tri-Loop or Tri-Blade Toroidal Propellers for FPV Drone Quadcopter Cinewhoop
This is my WIP third generation tri-loop or tri-blade design which improves upon the second by following more traditional rules of propeller blade design whilst also reducing weight at the outer edge, (hopefully) improving prop response.…
- Downloads
- 6,735
- Likes
- 508
- Rating
- 4.5
P
PrintablesJérémy Reeder
Polymaker Filament Presets - Nylon, PC, PLA, PETG, PVB, TPU
PrusaSlicer filament profiles* for the various lines of filament produced by Polymaker. Because well-tuned material-specific settings outperform generic default settings. * Or ‘presets’ as the kids are now calling them. Observations…
- Downloads
- 4,864
- Likes
- 392
- Rating
- 4.78
P
PrintablesWhitespace
FPV-Wing-Racer (rev.2)
Print. Fly. Crash. Repeat. Round 2! ----------------------- After the initial version has been out for some time now. It's time for some improvements, thanks to some feedback from the community I got rid of the click-in system and…
- Downloads
- 4,689
- Likes
- 3,709
- Rating
- 4.9
P
PrintablesProgrammaDan
Dragonfly FPV Drone
ATTENTION: as of 1/21/2026, The Phoenix FPV Drone has been "modernized" to compete with my other 5" drone, the Leopard. Though I maintain that the Leopard is slightly tougher, and the Dragonfly is slightly lighter, you need only choose…
- Downloads
- 4,412
- Likes
- 1,002
- Rating
- 5
P
PrintablesProgrammaDan
Wraith FPV Drone
The Wraith FPV Drone This is a 4/3.5 inch drone frame. Mine is printed using carbon fiber PA6 nylon for the body and ABS for the top. I'll list out the specific electronic and mechanical hardware that I used below. This list will also…
- Downloads
- 3,753
- Likes
- 718
- Rating
- 5
P
PrintablesProgrammaDan
Nighthawk & Phoenix FPV Drone
ATTENTION: This design is straight up antiquated guys. Unless you're a techno archeologist pick one: Imma leave this up because I'm not a historical revisionist but seriously, what are you still doing here? A performance optimized beast,…
- Downloads
- 3,369
- Likes
- 590
- Rating
- 5
P
Printablesandreirusu99
FPV drone - featured on GreatScott!
UPDATE: GreatScott!, a large electronics YT channel, has made an FPV build guide using this frame! Check it out here: UPDATE: I have added camera mount 30mm and rear mount 30mm, as requested by a user UPDATE: I have added STEP files and a…
- Downloads
- 2,968
- Likes
- 589
- Rating
- 5
P
PrintablesMakerMeik
BetaFPV Air Canopy for lower cam angles - For Air65 and Air75 Tinywhoops
This is a canopy for the BetaFPV Air Tinywhoops, like the Air65 and Air75. The longer tail section allows a lower camera angle to be set. I also made a widening in the area of the right holder to additionally fix the antenna connector. I…
- Downloads
- 2,898
- Likes
- 194
- Rating
- 5
P
PrintablesSTRIKING FPV
V2 Bi-Loop or Bi-Blade Toroidal Propellers for FPV Drone Quadcopter
This is my second generation bi-loop or bi-blade design which, is much more like what the MIT boys pumped out, featuring a more teardrop-y kinda' shape. Much like V3 of my tri-loop design, these ones again follow a more traditional…
- Downloads
- 2,761
- Likes
- 190
- Rating
- 4.6
P
PrintablesMarkus_p
FPV-Rover V2.0 (Tank)
It's finally here. Version 2.0 of the FPV-Rover. This is the second version of the FPV-Rover. This one is with 540 motor. This was requested a lot on the other version and I redesigned the whole rover (although it looks the same) for this…
- Downloads
- 2,643
- Likes
- 853
- Rating
- 5
P
PrintablesFantomas
MC4 & EVO2 PV solar wrench (spanner)
ebay note: A 3D print of this this model is currently illegally sold @ https://www.ebay.ie/itm/314569335395 /314580358088 /314673977931 PV tool for use with both MC4 and EVO2 style solar connectors. ⚠WARNING⚠ Tool was design based on…
- Downloads
- 2,333
- Likes
- 133
- Rating
- 5
P
PrintablesMacNeill
Project Synthara - Generative Design FPV Drone Frame 3.5 Inch
Drones are a perfect playground for lightweight yet robust designs, and Synthara takes full advantage of cutting-edge generative design techniques. This 3D-printed drone frame is engineered for FPV enthusiasts looking for a balance…
- Downloads
- 2,168
- Likes
- 280
- Rating
- 5
P
PrintablesProgrammaDan
Leopard FPV Drone
Let me be clear about one thing. I like drones. And I like printing them. It drives down costs, it makes parts easily replaceable, and it enables all a whole new kind of design philosophy. So I've certainly made a good few of them myself.…
- Downloads
- 2,131
- Likes
- 770
- Rating
- 5
P
PrintablesVonscherf_arms
PVS-69 Alpha 1.1
Welcome to the PVS-69 Alpha 1.1 release This pack contains the files for the 69 Alpha Bino, Mono and the battery pack. hardware kit and parts lists are available on vonscherfarms.com
- Downloads
- 2,099
- Likes
- 65
- Rating
- 5
P
Printablesdigipix3d
PVC Pipe Connectors - 1 Inch
PVC Pipe Connectors - 1 Inch These 3D printable connectors are designed for standard 1-inch PVC pipes, perfect for DIY projects, furniture, or plumbing setups. The set includes various shapes and configurations, ensuring maximum…
- Downloads
- 2,087
- Likes
- 455
- Rating
- 5
P
PrintablesRCMakerLab
FPV DRONE
Many parts of the drone are designed for PLA filament. The motor arms are designed for heat resistant filament (PETG, ABS, ASA). Assembly steps and details are shown in the video. Slicer settings are included in the part names. All…
- Downloads
- 2,035
- Likes
- 381
- Rating
- 5
P
Printableskaschberle
2" FPV Drone Frame
Experimental monocoque 2" FPV Drone frame. This is a work in progress, I might remove outdated models inbetween. Current version features: top battery mount very crash resistant, depending on material (recommended: ASA, PCCF, mechanically…
- Downloads
- 2,015
- Likes
- 155
- Rating
- 4.9
P
Printablestkachmikhailo
Legs for fpv drone (10)
If you like my models, please support me on Patreon (link in profile). your financial support will help me continue to help the defenders of Ukraine . thanks for the help everyone.
- Downloads
- 1,865
- Likes
- 66
- Rating
- 5
P
PrintablesLWC
PVS 420 thermal vision 50Hz low budget 18650 monocular (256X192, 384X288, 640X512)
UPFRONT: I just created an Discord server for the PVS420 so its easier to talk about and share thoughts, ideas, improvements. All further updates to the design, functions and software will be available on my Discord!…
- Downloads
- 1,833
- Likes
- 1,230
- Rating
- 5
P
PrintablesYBlood - Tony Youngblood
3-Way Elbow, 1/2 Inch PVC Pipe Fitting Series #HalfInchPVCFittings - UPDATED 2015-02-02
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here is a 3-Way Elbow designed to…
- Downloads
- 1,769
- Likes
- 283
- Rating
- 5
P
PrintablesTim O'Brien
FPV *Pod* Mount: for O3, Walksnail, anything, Max-FOV, no props, max protection, any quad, any cam!
Companion project to my other parametric configurable FPV designs: Pod | O4 | Frame Whoop Action2 , 3-5 AcePro GoPro Mini Hero 9-12 Antenna Mount Protect your FPV camera with TPU in front of the lens for maximum protection but still with…
- Downloads
- 1,689
- Likes
- 227
- Rating
- 5