1 / 3
FPV Drone Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A clip you mount of your backpack to attach your drone via a battery strap.
- Rating
- 5 / 5
- Likes
- 60
- Downloads
- 175
- Makes
- 2
- Views
- 1,541
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Have you ever wanted to mount your drone on your backpack, but it was never convenient enough to buy a separate backpack, or buy a mount from amazon? Well now you can put your printer to use and print this amazing mount. All you need are the two printed plates and a couple of commonly found parts.
Part list:
- M3 Screw (5mm long) - 3x
- M3 Nut - 3x
- M3 Standoff (I used 8mm but it depends on thickness or your straps) - 3x
Assembly (you won't believe how easy it is):
- Print the plates (both of them)
- Gather together your screws and bolts and standoffs
- Press the M3 Nuts into the bottom plate
- Screw in the Standoffs
- Attach the top plate
.f3d file included so you can modify it to your own belt dimensions. The belts I used were:
- Backpack belt - 20.00 mm wide, 1.75 mm thick
- Battery strap - 16.50 mm wide, 2.50 mm thick