1 / 3
FPV Drone Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A clip you mount of your backpack to attach your drone via a battery strap.
- Ocena
- 5 / 5
- Polubienia
- 60
- Pobrania
- 175
- Wydruki
- 2
- Wyświetlenia
- 1541
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (77)Powiązane
Have you ever wanted to mount your drone on your backpack, but it was never convenient enough to buy a separate backpack, or buy a mount from amazon? Well now you can put your printer to use and print this amazing mount. All you need are the two printed plates and a couple of commonly found parts.
Part list:
- M3 Screw (5mm long) - 3x
- M3 Nut - 3x
- M3 Standoff (I used 8mm but it depends on thickness or your straps) - 3x
Assembly (you won't believe how easy it is):
- Print the plates (both of them)
- Gather together your screws and bolts and standoffs
- Press the M3 Nuts into the bottom plate
- Screw in the Standoffs
- Attach the top plate
.f3d file included so you can modify it to your own belt dimensions. The belts I used were:
- Backpack belt - 20.00 mm wide, 1.75 mm thick
- Battery strap - 16.50 mm wide, 2.50 mm thick