MC4 & EVO2 PV solar wrench (spanner)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
PV tool for use with both MC4 and EVO2 style solar connectors.⚠WARNING⚠ Tool was design based on connectors made by…
- Rating
- 5 / 5
- Likes
- 133
- Downloads
- 2,345
- Makes
- 24
- Views
- 5,558
- Reviews
- 18
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
ebay note: A 3D print of this this model is currently illegally sold @ https://www.ebay.ie/itm/314569335395
/314580358088
/314673977931
PV tool for use with both MC4 and EVO2 style solar connectors.
⚠WARNING⚠ Tool was design based on connectors made by Staubli/Multi-Contact, there is absolutely no guarantee it will be compatible with other brands.
Multifunctional spanner that can be used to:
- hold connector nut
- hold connector body
- disconnect female and male pair
Please excuse the poor quality of my print, I had only a roll of old PET-G to work with. Print Settings ==============
Printer:
Craftbot+
Resolution:
0.2
Infill:
15-30%
Filament:
Nebula PET-G
light brown
Notes:
As with most thin prints key to structural strength is number of walls, 4-5 should be sufficient, infill % doesn't matter as much.
PET-G's springiness works nicely especially for the fork end of this tool (use it to disconnect mated connectors).
How I Designed This
Based on connectors made by Staubli / Multi-Contact
⚠WARNING⚠
Tool was design based on connectors made by Staubli/Multi-Contact, there is absolutely no guarantee it will be compatible with other brands.
Category: Hand Tools