MC4 & EVO2 PV solar wrench (spanner)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PV tool for use with both MC4 and EVO2 style solar connectors.⚠WARNING⚠ Tool was design based on connectors made by…
- Ocena
- 5 / 5
- Polubienia
- 133
- Pobrania
- 2333
- Wydruki
- 24
- Wyświetlenia
- 5532
- Oceny
- 18
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
ebay note: A 3D print of this this model is currently illegally sold @ https://www.ebay.ie/itm/314569335395
/314580358088
/314673977931
PV tool for use with both MC4 and EVO2 style solar connectors.
⚠WARNING⚠ Tool was design based on connectors made by Staubli/Multi-Contact, there is absolutely no guarantee it will be compatible with other brands.
Multifunctional spanner that can be used to:
- hold connector nut
- hold connector body
- disconnect female and male pair
Please excuse the poor quality of my print, I had only a roll of old PET-G to work with. Print Settings ==============
Printer:
Craftbot+
Resolution:
0.2
Infill:
15-30%
Filament:
Nebula PET-G
light brown
Notes:
As with most thin prints key to structural strength is number of walls, 4-5 should be sufficient, infill % doesn't matter as much.
PET-G's springiness works nicely especially for the fork end of this tool (use it to disconnect mated connectors).
How I Designed This
Based on connectors made by Staubli / Multi-Contact
⚠WARNING⚠
Tool was design based on connectors made by Staubli/Multi-Contact, there is absolutely no guarantee it will be compatible with other brands.
Category: Hand Tools