WEN 6502T benchtop sander shopvac hose fitting
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter for 1.25" shopvac hose to connect to Wen benchtop sander for dust collection.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 14
- Makes
- 0
- Views
- 117
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Solid piece or glue-together adapter for 1.25" shopvac hose to connect to Wen benchtop sander for dust collection. Tight fit and looser fit model included, as the tighter fit cracked a bit when the vacuum hose was inserted too forcefully but it worked fine with a hose clamp.
Printed as two halves to save on support material, glued together with CA glue and reinforced with an extra hose clamp. I've also included the non-split model, if you prefer.
Model has small relief grooves in the larger diameter in case you want to print out of TPU or use a hose clamp around the larger diameter as well.