WEN 6502T benchtop sander shopvac hose fitting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter for 1.25" shopvac hose to connect to Wen benchtop sander for dust collection.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 117
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Solid piece or glue-together adapter for 1.25" shopvac hose to connect to Wen benchtop sander for dust collection. Tight fit and looser fit model included, as the tighter fit cracked a bit when the vacuum hose was inserted too forcefully but it worked fine with a hose clamp.
Printed as two halves to save on support material, glued together with CA glue and reinforced with an extra hose clamp. I've also included the non-split model, if you prefer.
Model has small relief grooves in the larger diameter in case you want to print out of TPU or use a hose clamp around the larger diameter as well.