Phone Camera Grip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple grip you can add to your phone case - with tripod mount
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 391
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
This is a simple grip for your phone
Multiple sizes are included from 60 to 90mm in height to match the width of your phone. I recommend printing on an angle with support to get minimal layer lines. I printed these with Matte PLA and got a very nice surface finish.
Two heat set inserts can be added for tripod mounting. The matching size is 1/4"-20 x 6mm x 8mm. I recommend mounting to your phone case with velcro (and if you don't already have velcro on your phone case, I 100% recommend that!)x
Finally, I've included the parametric OpenSCAD file in case you want to make other changes