Phaetus Dragonfly BMO FilamATrix Printhead for Voron Stealthburner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the Filametrix Phaetus Dragonfly BMO printhead made to be used with the current revision of FilamATrix
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I had some Phaetus Dragonfly BMO hotends that I wanted to use with an Ender3NG Mod I am working on, that would be using a Stealthburner toolhead. I want it to be setup for multi-material (besides just the added convenience of a toolhead setup with a filament cutter for load and unload). I didn't want to start with having to create new geometry for the positioning of the hotend, so I worked off this original model I found "Phaetus Dragonfly BMO Filametrix Printhead for Voron Stealthburner" and the current models for the FilamATrix project and effectively did a chop-shop mod to create the printhead I needed. I figure someone else might find them useful, so here they are.
FilamATrix Project: https://github.com/thunderkeys/FilamATrix