Phaetus Dragonfly BMO FilamATrix Printhead for Voron Stealthburner
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of the Filametrix Phaetus Dragonfly BMO printhead made to be used with the current revision of FilamATrix
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 47
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
I had some Phaetus Dragonfly BMO hotends that I wanted to use with an Ender3NG Mod I am working on, that would be using a Stealthburner toolhead. I want it to be setup for multi-material (besides just the added convenience of a toolhead setup with a filament cutter for load and unload). I didn't want to start with having to create new geometry for the positioning of the hotend, so I worked off this original model I found "Phaetus Dragonfly BMO Filametrix Printhead for Voron Stealthburner" and the current models for the FilamATrix project and effectively did a chop-shop mod to create the printhead I needed. I figure someone else might find them useful, so here they are.
FilamATrix Project: https://github.com/thunderkeys/FilamATrix