1/4in Cable Tie-Downs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1/4in Cable Tie-Downs that can be left open for adding/removing cables, or securely closed for permanent installs
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 15
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a tie-down I could either screw down to secure hoses/cables or leave open to easily add and remove cables as needed, so I made these. Each one holds 1/4in tubing or a bundle of wires against a wall, bench, or panel. The mouth is flexible and defaults open: leave it open to have the option of adding or removing cables, or screw it down to secure them in place.
Hardware
2 #8 wood screws (or similar)
Printing
PLA works fine indoors. PETG will give the mouth a bit more flex.
Feedback
Have suggestions on ways to improve this model? Leave a comment! I'm always looking for user feedback.
Happy printing!
Like what I do and want to support me? Buy me a coffee!