Pokeball Fidget Clicker for MX Cherry Keyboard Switch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gotta Click 'em All!!!
- Ocena
- 5 / 5
- Polubienia
- 96
- Pobrania
- 413
- Wydruki
- 3
- Wyświetlenia
- 1853
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Here's an idea gleamed from my nephew along with a challenge to have this design and successfully prototyped within a week. I modeled this in Autodesk Fusion as I continue to climb from "I have no idea what I'm doing" to "I almost know what I'm doing and now I'm a little dangerous."
Internally this takes a MX Cherry keyboard switch to provide the clicky action. I bought a whole bag of knockoff mx switches off of Ali Express, and since I don't need them to electronically work they seem to do pretty good. This is designed to be printed separately and then the bottom, center, and button are glued together. Super glue or E6000 should do that job quite well.
There's two different white/bottom files, titled "Bottom" and "Bottom Loop". A plain round one or one with a loop that you can attach to your keychain.
Your standard .2 print height settings apply, though the "Top" red-colored part can be a real pain sometimes. I tend to print that from inside to outside and slow down to 45mm/s, along with a brim and plenty of tree support.