1 / 6
Motorized HVAC damper / motorizovaná klapka klimatizace — zdjęcie 1
1 / 6

Motorized HVAC damper / motorizovaná klapka klimatizace

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

EN: Assembly for a ventilation damper controlled by a Zigbee motor. CZ: Sestava ventilační klapky řízené Zigbee motorem

Ocena
0 / 5
Polubienia
1
Pobrania
3
Wydruki
0
Wyświetlenia
63
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

Assembly for a ventilation flap/damper controlled by a Zigbee motor. It's supposed to be embedded into a plenum box (I made it from XPS) attached to a ducted aircon and connected to 150mm duct.

The motor can be connected to Home Assistant through Z2M and controlled remotely - it's this one: https://www.aliexpress.com/item/1005005801861031.html

It is necessary to take it out of its casing to mount it.

The adapter flare should be printed round-side-down.

The flap's shorter pin should interface with the motor shaft connector.

CZ: Přechodka mezi vzduchotechnický box (vyrobený z XPS) napojený na kanálovou klimatizaci a 150mm potrubí.

Použitý motor lze ovládat přes chytrou domácnost Home Assistant přes Z2M: https://www.aliexpress.com/item/1005005801861031.html

Je třeba ho rozebrat.

Nátrubek se tiskne kulatou částí dolů.

Kratší kolík klapky by měl být napojený na adaptér hřídele motoru.

Tagi