1 / 6
Motorized HVAC damper / motorizovaná klapka klimatizace — image 1
1 / 6

Motorized HVAC damper / motorizovaná klapka klimatizace

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

EN: Assembly for a ventilation damper controlled by a Zigbee motor. CZ: Sestava ventilační klapky řízené Zigbee motorem

Rating
0 / 5
Likes
1
Downloads
3
Makes
0
Views
57
Reviews
0

Updated at source:

Model information

License
GNU General Public License v3.0

Assembly for a ventilation flap/damper controlled by a Zigbee motor. It's supposed to be embedded into a plenum box (I made it from XPS) attached to a ducted aircon and connected to 150mm duct.

The motor can be connected to Home Assistant through Z2M and controlled remotely - it's this one: https://www.aliexpress.com/item/1005005801861031.html

It is necessary to take it out of its casing to mount it.

The adapter flare should be printed round-side-down.

The flap's shorter pin should interface with the motor shaft connector.

CZ: Přechodka mezi vzduchotechnický box (vyrobený z XPS) napojený na kanálovou klimatizaci a 150mm potrubí.

Použitý motor lze ovládat přes chytrou domácnost Home Assistant přes Z2M: https://www.aliexpress.com/item/1005005801861031.html

Je třeba ho rozebrat.

Nátrubek se tiskne kulatou částí dolů.

Kratší kolík klapky by měl být napojený na adaptér hřídele motoru.

Tags