1 / 8
2.4ghz folded dipole cover for Taranis etc. — zdjęcie 1
1 / 8

2.4ghz folded dipole cover for Taranis etc.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A cover to protect your 2.4 ghz folded dipole. This is a great antenna you can build yourself following the…

Ocena
0 / 5
Polubienia
1
Pobrania
8
Wydruki
0
Wyświetlenia
167
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

A cover to protect your 2.4 ghz folded dipole. This is a great antenna you can build yourself following the instructions at the link below. I build mine with .8mm copper wire if you used 1mm copper then scale up by 2%.

Print two and press them together.

Update: Added new model for turning it into a yagi. Just insert a 63mm 16awg wire through the hole in the extended part. This will double the range of the antenna in the direction it is pointing but you will loose range behind you. Special thanks to Alex Greve of VAS. If you want to purchase instead of making your own I highly recommend VAS. http://videoaerialsystems.com/

There is also a jig for making the dipole under my other things.

https://www.rcgroups.com/forums/showthread.php?2129736-Taranis-Antenna-Upgrade-%28Part-1%29/page19

Print Settings

Printer Brand:

TEVO

Printer:

Tornado

Rafts:

No

Supports:

Yes

Resolution:

.1

Infill:

100

Filament: RepRapper PLA Any

Category: R/C Vehicles

Tagi