2.4ghz folded dipole cover for Taranis etc.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A cover to protect your 2.4 ghz folded dipole. This is a great antenna you can build yourself following the…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 167
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A cover to protect your 2.4 ghz folded dipole. This is a great antenna you can build yourself following the instructions at the link below. I build mine with .8mm copper wire if you used 1mm copper then scale up by 2%.
Print two and press them together.
Update: Added new model for turning it into a yagi. Just insert a 63mm 16awg wire through the hole in the extended part. This will double the range of the antenna in the direction it is pointing but you will loose range behind you. Special thanks to Alex Greve of VAS. If you want to purchase instead of making your own I highly recommend VAS. http://videoaerialsystems.com/
There is also a jig for making the dipole under my other things.
https://www.rcgroups.com/forums/showthread.php?2129736-Taranis-Antenna-Upgrade-%28Part-1%29/page19
Print Settings
Printer Brand:
TEVO
Printer:
Tornado
Rafts:
No
Supports:
Yes
Resolution:
.1
Infill:
100
Filament: RepRapper PLA Any
Category: R/C Vehicles