Kabelklemme; Solar cableclip for K2 Single Rail
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cableclip, specifically designed for the K2 SingleRail-System, printed in TPU.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 87
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
I used the K2-SingleRail-System to install my solarpanels. To keep the cables and plugs from touching the tiles, I wanted an option to mount them on the rails. For best results, apply them on the upwards directed side of the rail.
With no space below the panels this cableholter easyly clips on the rail and can be removed by pulling the tab.
I printed in TPU 95A on a anycubic i3 mega s (which got for cheap a while ago), because it is relatively uv-resistant.
6x 6mm² solarcable
easy to install and to remove
reliable and stable fit
Of course there are more resistant filaments, but they are harder to print (at least on a printer like mine)