RC Dutch Rijkswaterstaat boat (vlet) “Bellona”
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
RC boat Bellona
- Ocena
- 0 / 5
- Polubienia
- 51
- Pobrania
- 263
- Wydruki
- 0
- Wyświetlenia
- 1067
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Dear model builders,
I would like to introduce a new model of the Dutch Rijkswaterstaat boat (vlet) “Bellona”.
This launch was built in Zaandam in 1984 and sold to a private owner in 2008.
More information can be found on these two websites:
https://varenderfgoed.nl/dv/bellona.html
https://www.debinnenvaart.nl/schip_detail/6335/
The model is built at a scale of 1:15, with a length of approximately 72 cm and a width of approximately 24 cm.
The boat has a removable interior wheelhouse.
Since painting is not my strongest skill, I used different colors for some parts.
I made the hull, servoholder, motorsupport and (interior) wheelhouse using an FDM 3D printer. I then treated the hull wheelhouse by painting three layers of ABS-like resin onto them. I made all other parts using an SLA printer.
In "Other files", you will find a PDF with explanations and photos regarding how I assembled some parts and which components I used.
If you build this model, I would love to see photos in the “makes” section.
If you have any questions, feel free to ask. It may take a while to get a reply. You can ask your questions in English, German, and my native language, Dutch.
Regards, Rene76
Update 25-8-2026: Upon request, the three files of the wheelhouse without window support. It is advised to use the standard steering house for strength during gluing and sanding.