1 / 2
Drawer cover and handle for IKEA FRIIDROTT
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Handle and cover for IKEA FRIIDROTT drawers.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 63
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
The handle fits into the curved cutout of the IKEA FRIIDROTT drawer. This might help to keep some dust out of the drawers.
There are two holes in the back for screws, if needed. Although mine are holding in place well enough without screws. The thinnest parts on the side are 0.2 mm, so that they print exactly one layer thick, if you use that layer height.