Hand Reamer Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's a fancy case for some cheap hand reamers
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 58
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Bought a set of cheap hand reamers on Amazon (link) with sizes from 3mm to 12mm with an H8 tolerance (a little ambitious for something done by hand, but whatever) that came in a crappy little vinyl pouch. I like the old drill bit holders that display the bits all at once, so I designed this round case with a locking lid. The smaller holes got a little tight which is why the model dimensions are oversized, but it works so whatever.
Also put some 0.01mm text in relief and an alignment pip on the outside of the case if you have a multi-color printer (it makes color painting a lot easier in the slicer).
I made mine from ABS, but should work with any material so long as you aren't leaving this in your car during the summer or something.