1 / 3
Mac OS "Beach ball" for Wahoo Kickr stationary trainer — zdjęcie 1
1 / 3

Mac OS "Beach ball" for Wahoo Kickr stationary trainer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Make indoor training even more terrifying for Mac OS users.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
26
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I don't have a nice color 2D printer, but I've got a 3D printer, so I made a Mac OS "beach ball" for my Wahoo Kickr (this model is the Core but I think the flywheels are all the same size) indoor trainer.

Serves no purpose at all.

Needs a printer that can print 7 colors (six colors of the rainbow on the outside and a white backer to make the colors pop) but if you're really into the idea, it's possible to slice for 7 colors and then swap the tool change GCODE for M600 filament changes. You'll need to know which one will be coming next (if your printer supports it you can display a message on the screen to let you know which color is next) and that will allow you to get 'er done on a single color printer. While there are a bunch of tool/filament changes, it's only 2 layers thick so it shouldn't take long.

For mine, I brushed rubber cement on the back of the "sticker" and let it dry while I applied rubber cement to the face of the flywheel. It's gonna stick pretty much as soon as it touches, so center it as well as you can. See if you can do it better than I did, it won't be too hard.

Tagi