Fuel Pump Lock Ring removal Tool Audi A2 (VAG 3217)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tool fitting Audi A2 anatomy for removing the Fuel Pump. 1/2" top, and 2cm holes on sides for using an extension.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed to change the fuel pump on an Audi A2 and did not have the official special tool (VAG 3217) for it, so i created this.
Tightening torque for the lock ring is 80Nm.
AI says the tool 3217 is compatible with the following models, but measure clearances etc. before jumping to conclusions, since i tailored this to the A2.
ManufacturerModel / SeriesPlatform / TypeProduction YearsNotes / Restrictions
Audi A2 Type 8Z 2000 – 2005 Primarily for gasoline (petrol) models
Audi A4 B5 (Type 8D) 1994 – 2001 Sedan & Avant
Audi A4 B6 (Type 8E) 2000 – 2004 Partial overlap with newer T10202 tool
Audi A6 / S6 C4 (Type 4A) 1994 – 1997 All engine variants
Audi A6 / S6 / AllroadC5 (Type 4B) 1997 – 2005 FWD & Quattro models
VWGolf MK3 / VentoType 1H 1991 – 1998 Especially VR6 and Syncro (AWD) models
VWGolf MK4 / Bora / JettaType 1J 1997 – 2005 Mainly 4Motion (AWD) variants
VWPassat B3 / B4 1988 – 1997 All models with plastic locking ring
VWPassat B5 / B5+ (3B / 3BG) 1996 – 2005 FWD & Syncro / 4Motion models
VWTransporter T57H / 7J 2003 – 2009 Primarily gasoline engines / Pre-facelift
Porsche 911 996 Series 1997 – 2006 Uses identical fuel sender locking ring
Porsche Boxster 986 Series 1996 – 2004 Uses identical fuel sender locking ring