Case and Mount for Esphome Human Presence Sensor LD2450/LD2410 ESP32 C3 Super Mini/Pro Mini
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall Mountable Casing for ESP32-C3 Super Mini/Pro Mini & LD2410C/LD2450 mmWave Sensor
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 289
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Heavily inspired by Yoram van de Velde's Case and mount for LD2450 and ESP32 C3 Super Mini
I remade everything in Solidworks.
Features:
Houses ESP32-C3 Super Mini/Pro Mini & LD2410C/LD2450 mmWave Sensor
Designed to be wall mounted or stand on its own with pan and tilt support
powers via USB-C plugged from behind for clean look
No soldering needed just plug dupont connectors from esp32 to mmWave sensor
Assembly:
The case and stand are connected via mount_connector
2 * m3x16 or m3x20 screw
2 * m3 nut
Wall Mounting:
M3 or M4 screw
Printing instructions:
Filament: only tested in PLA
Orientation: Check photos
Layer height: 0.2mm
Walls: 3
Infill: 15%
Supports: Not needed
Mine are printed on Voron Trident 300