Hoysond 7 Inch Touch Screen QIDI Plus 4 Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A heavily modified remix of Stew's Pi Touch Display 2 Case to support the Hoysond 7" Touch Screen
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 149
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is a loose derivative of Stew's design. The basket angles and overall design are the same (including using the same screen holder), however the odd features of the Hoysond screen meant I needed to design a "shroud" to attach the screen to, and then attached that to the basket.
I used M2.5 screws for attaching the screen to the shroud, and the shroud to the basket. I just screwed them straight into the plastic, and they're bound enough to hold it together strongly. A design using HSIs or square nuts would probably be better, but I got sick of printing prototypes for all the tweaks I had to make and this design worked for me.
There's a cutout on the right-side for the Hoysond ports. I moved the RPi mount to the bottom left, and USB ports facing upwards so cables would be easier to route to the screen and anything else plugging into the Pi. Specifically, I oriented the Pi this way to prevent cables going out the bottom of the basket, otherwise the printer door will hit them.
Print settings:
Filament: anything you like really - I printed mine in PET-G. The Screen Holder print that this attaches to is the one that needs to be printed in a heat tolerant filament.
Quality: Layer height 0.2.
Strength: Wall loops 3, Infill Rectilinear 15% - it's really not bearing much weight so it doesn't need to be super strong.
Supports: Disabled. There are thin posts added for the Pi USB port access on the top, which should be sufficient for bridging.
If you don't need to install a Pi behind the screen, I have also included a slim variant (but it's untested by me)