Skeg Stabilizer / Centerer for Tucktec foldable kayaks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This will center/stabilize the skeg on a Tucktec Pro 2025 model foldable kayak.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This will center and help stabilize the skeg on a 2025 Tucktec Pro foldable kayak.
After assembling the Kayak, including the skeg, reach inside the rear of the kayak and place this over the center stern fold - and make sure to push it as far back as you can so that both sides of this are against the sides of the kayak.
It will keep your steg straighter in the water. The center fold likes to lean to one side - which turns the skeg sideways. This will keep the fold centered and straight. Admittedly the skeg is a little floppy by design - but at least this way it won't act like a rudder and steer you in circles.
Obviously - a kayak is a wet environment. I printed and tested this using PLA+ but for sure that would not last a long time with the moisture. For long term use you would want a water resistant filament. Your mileage may vary.