VFD Controller Box + VFD Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This device can be used to operate a variable frequency drive easily
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 63
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Noncommercial
What you can see in the picture can be cut using a laser cutter or printed if you do not have one, but keep in mind that 0,1mm depth is probably not enough for a printer to make the signs look nice, so make it 0,25mm deep at least. Any material will do, but I recommend cutting it with a laser from 3mm plywood, but a cheap, impact and temperature resistant plastic like PETG is also fine.
The box does not have holes for wires. Make them wherever you like and how big you like.
Please do not re-upload STL or any other mesh version of this project. I upload STEP only, because I want it to be easily editable. Do not poison the internet. For commercial use contact me and I am sure that we can build something cool out of it. Other than that do whatever you like as long as you mention me as the author of the model.