1 / 5
Rogue Fitness Women's Pyrros Weightlifting Bar Lock — zdjęcie 1
1 / 5

Rogue Fitness Women's Pyrros Weightlifting Bar Lock

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Barbell lock designed specifically for the Rogue Fitness women's 15kg Pyrros weightlifting barbell.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
32
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Indoor Sports
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

If you are a gym owner, coach, or happen to be a women who weightlifts in a public training facility with her own personal Rogue Pyrros bar... do I ever have the barbell lock for you!

Contrary to the universal lock design that slides onto a barbell sleeve, this lock fits around the sleeve, collar, and shaft. While this design is unfortunately specific to the barbell it is designed for, it doesn't require a hex key to tighten it, it can't fall off if loose and it's theoretically less susceptible to a brute force attack.

I recommend printing with the thicker "shaft-side" of the lock on the build plate with tree supports.

Finally, the hinge requires a 5mm diameter rod 5cm long; I recommend/used a steel rod. The fit is tight so a vise or similar will make installation easier. The lock shackle should be at least 50mm long and not much thicker than 6-7mm in diameter.

Recommended Print Settings:

Filament: PETG (or stronger)

25%+ cubic/gyroid infill

4 walls

Tagi