1 / 5
Rogue Fitness Women's Pyrros Weightlifting Bar Lock — image 1
1 / 5

Rogue Fitness Women's Pyrros Weightlifting Bar Lock

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Barbell lock designed specifically for the Rogue Fitness women's 15kg Pyrros weightlifting barbell.

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
32
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

If you are a gym owner, coach, or happen to be a women who weightlifts in a public training facility with her own personal Rogue Pyrros bar... do I ever have the barbell lock for you!

Contrary to the universal lock design that slides onto a barbell sleeve, this lock fits around the sleeve, collar, and shaft. While this design is unfortunately specific to the barbell it is designed for, it doesn't require a hex key to tighten it, it can't fall off if loose and it's theoretically less susceptible to a brute force attack.

I recommend printing with the thicker "shaft-side" of the lock on the build plate with tree supports.

Finally, the hinge requires a 5mm diameter rod 5cm long; I recommend/used a steel rod. The fit is tight so a vise or similar will make installation easier. The lock shackle should be at least 50mm long and not much thicker than 6-7mm in diameter.

Recommended Print Settings:

Filament: PETG (or stronger)

25%+ cubic/gyroid infill

4 walls

Tags