1 / 2
Prusa XL tool configuration tray — zdjęcie 1
1 / 2

Prusa XL tool configuration tray

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This tray holds nozzle caps, fillament drybox caps and TX8 screwdriver for Prusa XL multitool setup.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
42
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
GNU General Public License v2.0

I made this tray to keep the nozzle tube caps (Nozzle organizer cap) organized and to allow me to visually see what nozle is installed on each tool.

The tray also stores fillament griping caps (Drybox fillament hole adapters) that are color coded to let me know the material loaded into each tool.

The tray has a place to store a TX8 Wera or Unior screwdriver (it might also work for other precision screwdrivers) needed to change nozzles on Prusa XL toolhead. There are places under the screwdriver shaft for two 6x2mm magnets that can be inserted via pause print.

There is a space ready for a calibration pin storage, but I am still working on a mechanism.

The tray replaces original part frame-front-cover on the left side and reuses the screw and needs additional M4x10 countersunk screw with aditional M4 nut to fit into U8 extrusion on the right side of the tray. The part can be mirrored in slicer to mount it on the other side and it should work, and it shouldn't interfer with USB drive, but might make it a bit awkward to use.

Tagi