1 / 3
Fiat barchetta Seat Belt Guide — zdjęcie 1
1 / 3

Fiat barchetta Seat Belt Guide

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

For automatic retracting seatbelts.

Ocena
0 / 5
Polubienia
0
Pobrania
5
Wydruki
0
Wyświetlenia
38
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

This seat belt guide is designed to help the seat belt retract neatly instead of remaining loose or hanging when not in use.

 The design is based on a drawing originally shared by a user on the Dutch Fiat barchetta forum. The original design worked well, but on my car it interfered with the roof cover when closing the convertible roof. This may be due to changes in the design of the original cover over the years.

I redesigned it by making it narrower, eliminating the interference with the roof cover. 

The new version has been tested successfully on a Fiat barchetta Naxos Edition but should work on any model.

 Printing recommendations

  • PETG or stronger material recommended

  • Avoid PLA due to the temperatures and UV exposure the part may experience

  • Use settings suitable for a mechanically loaded part

Installation

The guide is designed to be installed using the original screws, without the washers.

Take care when tightening the screws. Do not overtighten them, as excessive force can cause the small mounting tabs/caps to break.

This is a user-made replacement/improvement and is not an original Fiat part.

Tagi