Fiat barchetta Seat Belt Guide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For automatic retracting seatbelts.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 38
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
This seat belt guide is designed to help the seat belt retract neatly instead of remaining loose or hanging when not in use.
The design is based on a drawing originally shared by a user on the Dutch Fiat barchetta forum. The original design worked well, but on my car it interfered with the roof cover when closing the convertible roof. This may be due to changes in the design of the original cover over the years.
I redesigned it by making it narrower, eliminating the interference with the roof cover.
The new version has been tested successfully on a Fiat barchetta Naxos Edition but should work on any model.
Printing recommendations
PETG or stronger material recommended
Avoid PLA due to the temperatures and UV exposure the part may experience
Use settings suitable for a mechanically loaded part
Installation
The guide is designed to be installed using the original screws, without the washers.
Take care when tightening the screws. Do not overtighten them, as excessive force can cause the small mounting tabs/caps to break.
This is a user-made replacement/improvement and is not an original Fiat part.