195 models
This is a seatbelt clip (dummy) to mute the seatbelt chime on certain seats. I created it for my dog in my Model 3. PLEASE NOTE: Do NOT use this for your seats when there are humans in them! Always put on your seatbelts! Print with 3…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
This is a simple Seatbelt Clip for the Volvo V40 (2016 Edition). It was built for strapping down things on the back seat of my Volvo V40 2016 Edition. I bet its compatible with various Volvo Models. Current tested Use cases are: Strapping…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for PETGSource material: PET
A small clip for use on the front seatbelts of AS350 helicopters to tidy up the loose ends of the seatbelt and prevent them from flopping all over the place. Keep those belt ends out of your VR window, and more importantly, away from the…
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for PETGSource material: PET
I have created a Model to print those fragile seatback retention clips in the trunk of the Ford III. I have printed them as rigidly as possible and used PETG for best layer adhesion. The support comes off quite easily, I'd however suggest…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
I have the issue where the rear seatbelts would occasionally slip out of the guides. I fixed this by designing a clip that goes over the guide. It easily clips onto the guide and also comes off quite easily when needed. It's recommended…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET
Emergency seatbelt cutter with convenient snap-in shopping trolley coin (GBP £1 or Euro) holder for your car keyring. Most credit goes to Justin for his great seatbelt cutter design which you can find at:…
Print approx. €0.36–€0.45 excl. taxPreliminary estimate for PETGSource material: PET
Pierce seatbelt replica. Fits Ascendant and most modern engines.
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET
Tlumič bezpečnostních pásů v autech - Seat belt damper in cars
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
This 3D printable seatbelt silencer clip is a handy solution for those times when you need to stop the constant seatbelt alarm in your car. Whether you’re driving around the parking lot or need to silence the alarm for any reason, this…
Is your Model Y's rear seatbelt slipping all the way back making it impossible for you or your passengers to buckle in? Or maybe you have the nice white interior and are starting to see some marks where the belts are. Put this underneath…
Seatbelt clip for stop beeping signalization. Its simple model
Tesla in Europe does not allow to disable rear seat occupation warning. It is due EU laws. I am riding with my 20kg dogs and they trigger warning beeps. I could use seatbelt, but seatbelt plug is huge and could be unconformable for dogs.…
This clips into the seat belt end to stop/ override the seat belt alarm. Can used when on game drives, birding or when have a inanimate load on the seat that triggers the alarm. Print Settings Printer Brand: Creality Printer: Ender 3…
Adapter for the automatic arm from bmw e92 Print at 14%/15% scale. After some users tryed it, looks the most reliable.
Seatbelt cheater designed for a 2010 Ford Focus. For all legal purposes, or whatever, I'm not your mom. Category: Vehicles
There are a few different versions of this that all stick out substantially from the seatbelt socket. I didn't want my dogs to break the protruding bits. Fits nice and tight. The tab goes towards the button side. The long model is for the…
A simple seatbelt clip to silence car warning sound. Please wear your seatbelt.
My parents got another car which missed the raising bulbs to keep the seatbelt plug high (you can grab it) So i made something that could help them Update: It is advised to make this thing from ABS or other high temp plastic. Because…
You ever had a problem that seatbelt is scratching your neck, or in case you have them going over your sensitive parts on the chest? This little thing will allow you to add a forth point of contact on your waist so that belt going over…
Introducing the Seatbelt Muter, a cleverly designed 3D solution that effectively silences the persistent and bothersome seatbelt alarm in your vehicle, especially when carrying a heavy bag. While this adapter is created to enhance your…
This is an easy-to-install version of Tesla Model Y's 2nd row seatbelt guide. You just need to snap it onto the head rest rods without the need to take them out (which isn't straightforward if you don't know how). I also found the…
There is not a way to disable the passenger seatbelt alarm. Pluging this in lets you “turn off” the alarm. This should not be used if a person is in the seat. I've included a few variations of the buckle. Beveled Pyramids Grids Spiky
Tired of struggling with seatbelt buckles that lay flat or disappear into the seat? This minimalist, high-efficiency stabilizer is specifically designed for rear car seats where buckles tend to flop over, making it difficult for…
Minimalistic clip for car seatbelt preventing buckle from sliding down too far. Fits for belts 46 mm wide and 1.2 mm thick. Print in ABS/PETG, 3-4 walls and 4-5 top/bottom layers, infill 25%. Check out my other designs:…
This is for my 2021 VW id.4, to turn off the annoying "put on your seat belt" alarm when my dog is in the front seat.
keychain for your needs. Cut Down if need be. 4mm base and 0.8 color change (0.2 layers = 4 layers) 37mm x 29mm 6mm Keyring hole
Seatbelt stop button. Printed in carbon fiber reinforced nylon. Use 1,75mm filament to hold everything tightly together. Plastic weld the ends with a soldering iron.
This lightweight clip will help to adjust the length and positioning of your seatbelt strap. It is printed with PLA at 100% infill.
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
With this design you don't have problems with injuries or mark-offs in your seats. It's working great with Tesla! Print it with PLA or PETG witch 20% infill. No support needed
A 2 in 1 tool to open your beer and use it as your seatbelt buckle Printing For printing use 100% infill and a layer height of your choice. After printing insert a 2cent coin into the hole and enjoy your Beer Opener! USE AT YOUR OWN RISK…
Use: This is a seatbelt insert for a Toyota Tundra. Should work on other Toyota’s as well. This prevents an annoying beep when I back my boat into the garage and need the freedom to move without a seatbelt on. Design: Design 1 should fit…
neues modell ohne schriftzug und 0.7mm schmaler new model without lettering and 0.7mm narrower
Sunvisor Clip for Resqme Seatbelt Cutter and Glass Breaker A clip for storing the Resqme seatbelt cutter and glass breaker on your sunvisor. This will keep this valuable escape tool close to hand in the event you ever need to use it! More…
This 3D model is a simple insert that fits into most standard seatbelt sockets to stop the seatbelt warning beep. It's perfect for situations where you're transporting heavy items, using a seat cover, or working inside the car without…
This is a remix of an original design available here: https://thangs.com/designer/hachem/3d-model/Seatbelt%20release%20aid-52901 Credit to the original author for coming up with the design. I changed the handle to a “half-circle” design…
Print on the thin edge face with snug supports to prevent the pegs shearing off. See the attached gcode for reference. Trim the T shaped peg if it is tight. Any elephant foot will make it very tight on that one side, so examine the bed…
These will plug into the seatbelts in the back to stop the alarm from going off. WEAR YOUR SEATBELTS. This is only intended to stop the alarm when you have something large in the back seats, like a dog. DO NOT USE THIS TO BYPASS FOR PEOPLE
The top attachment of the seatbelt is a steel and a large nut. This is not nice. Orginal there was a cover of black ABS. I lost one side and print a new on in red. I printed two because I changed the other side too. Printed in PETG, but I…
Resized holes on the buckle and the outer shell to fit tighter. Combined into one STL. Tested fit on 0.2mm layer height.
Mazda MX-5 Miata seat belt extenders for the NA/NB models.
VW seatbelt bolt plastic cover replacement with a little bit changed design for better printing printed verticaly, support needed fit this cars:
Found the 1995 Volvo 850 seatbelt release button by ksihota and printed that one first, but I couldn't get it to snap in place, instead it snapped of from one of the sides, so I looked closer and noticed that it was to tight in the…
This is a visor clip to hold a ResQme glass breaker / seatbelt cutting tool. Update: 29MAY2018 I added two versions of the clip that are MOLLE compatible. Print Settings Printer: Hatchbox Alpha Rafts: No Supports: No Resolution: 0.25mm…
It's really frustrating and stressful when a kid unlocks the seatbelt while driving. Reaching to the back seat can be impossible and dangerous. This little thing secures the seatbelt from unlocking by those little hands. At the same time…
Volvo seatbelt silencer for passenger seat with heavy objects. Do a manual color change to make the Volvo logo stand out. Quick and easy print. Also works for some models of Subaru
I know this fits Model 3, and purportedly is general purpose for Teslas. Probably fits other cars as well, but not entirely sure how standard these are. Be safe. The intent is to disable light/chime/bell/warning when heavy objects are…
This is a seatbelt alarm stopper for Suzuki Ignis. May work on other cars too. If you want to measure: The "tongue" without the handle at the end is 21 mm wide, 37 mm long and 3 mm thick. The thin parts around the hole are 5 mm on the…
Based on ksihota 's Seatbelt Release Button, this version features nice printable Text. Options: PRESS (OEM Style, if you want it to look Original) VOLVO (if you want to express your Brand) 850 Recommendations: Filament: Anything solid,…
It's a seat belt cheater for 2007-13 GM trucks. Use at your own risk, but be free to choose. Category: Hand Tools
I don't recommend driving without your seatbelt, but if you do.. Use this to stop the beeping.
Halterungen um den 5-Punkt-Sicherheitsgurt von Stokke am Tripp Trapp befestigen zu können. Montage erfolgt wie beim Original. Wurde 3D-Druck-freundlich konstruiert: Möglichst wenig Überhänge und integrierte Supports. Gedruckt mit vier Top…
This is a modified version of the Tesla Model Y rear seatbelt guide (original model: https://www.printables.com/model/251256-tesla-model-y-rear-seatbelt-guide ). The original model had a length of 264mm, which exceeded my printer's 260mm…
A hybrid grocery bag handle and seatbelt silencer, for extra convenience!
Tesla in Europe does not allow to disable rear seat occupation warning. It is due EU laws. I am riding with my 20kg dogs and they trigger warning beeps. I could use seatbelt, but seatbelt plug is huge and could be unconformable for dogs.…
Easy to print. You just have to make sure that the printed material can withstand the temperatures in the car (summer). My PLA was now in the oven at 70°C and kept its shape. Now I use PETG-CF With PLA dual Color. I hope you like it! —…
Saw a fake product once that advertised this combo in one tool. Decided to make it real. Think it started as a remix of two different models but eventually I just did it from the ground up. Designed probably a year ago and forgot about.…
I increased the girth of this tool to give it additional rigidity. The depth is now 3.1mm. I used Prusament PETG @ 3 walls and 15% Gyroid infill. Prints great. STL and 3MF files are included.
Seatbelt clip If your belt buckle is falling off, this clip is just for you after print cut out brims and carefully realease hinge with short moves for seatbelt 48mm wide print settings is in print files section Print settings 0,2mm layer…
Simple seatbelt clip for changing the shoulder strap position. Minimal material with reinforcement where needed for rigidity. I would suggest printing in a heat resistent filament as it will be in a vehicle.
3M VHB Tape Mount for Resqme Seatbelt Cutter and Glass Breaker A 3M VHB tape mount for storing the Resqme seatbelt cutter and glass breaker in your vehicle. This will keep this valuable escape tool close to hand in the event you ever need…
Used to stop the alarm as well as bring a classy look to your rig. Print all the same color or customize the colors.Prints without supports but may need a bit of trimming once printed. Please rate and review.
Pretty much same as the original one but made it thicker and changed the clip locking hole size so that it is a tighter fit. The fit is much tighter than the original one but this might make it not fit all cars. Tested on a Fiat Ducato…
Its a seatbelt guide that mounts to the tonneau cover bolt. You will need a m6 30mm long bolt, the original is too short. Recommend to print from PCTG ASA or Nylon. However i have broken some ASA seatbelt mount designs in the past, its a…
Bed Temp,50, Nozzle Temp,200, Infill,30%, No Support.
/!\ USE IT AT YOUR OWN RESPONSIBILITY The french biennal MOT test, I had to replace 4 of my seatbelt cap on my Peugeot Boxer. These are made by Mercedes (part number 901 860 11 69) made in ABS. My model isn't exactly the same but close…
A clip for inserting into the seatbelt slot. I drew the Cupra logo and the word "Cupra" myself, so it might not be 100% perfect. Version 1 is how I would ideally like it, but since the letters are cut out, I added supports of 0.2 mm.…
Remixed because Kia must have slimmed down the width of their seatbelt clips. Something like TPU is a great, durable filament to leave in the car. If you're better at modeling, feel free to take it away and make a way better one! I use it…
These are the covers for the seat rails, back seat rails, bottom seatbelt cover. In some cases will have to be mirrored. The back(from trunk) covers weren't redesigned, I just figured they were good enough like that(which is not perfect…
Minimalistic seatbelt stopper/relief. Attach to seatbelt at some of the anchor/flip points to reduce tension.
Safety door key to most CNC machines, personally tested on Mori Seiki. Also work with my car seatbelt as plug :D CNC Door Key X Seatbelt Plug by Lukas Rypar is marked with CC0 1.0. To view a copy of this license, visit…
This clip is pretty much the same as the original one, I just updated the kia logo and added a couple of holes to thread an elastic through. I used a bit of elastic string to attach this to the seatbelt receiver.
A convenient seatbelt cutter has the potential to save a life. You can't always have the standard larger-sized one around at all times, but with a keychain version, your odds are way higher to be safe when commuting. I printed in PLA and…
The source marked this model as adult content.
Made to fit Dodge Grand Caravan, will fit other Dodge models. Disable occupancy sensor while transporting parcels on passenger seat. Please use common sense: NOT FOR HUMAN USE . Print flat, no supports, low infill.
I designed this seatbelt buckle stopper because the original one in my car was missing. It keeps the buckle from sliding down, making it easier to reach. It's a simple press-fit design, but you can use super glue to make it stronger(I…
Are you tired of your car beeping when theres something on a unbuckled seat? Are you tried of clunky big seat muters that protrude out? I present the elite seatbelt muter! I printed FrancoScala's seatbelt muter and realised it works…
in 3d builder mit dem logo von opel erstellt
There are 2 versions on the model: One model that is a solid piece and the other has a small slot to slide the seat belt through so you do not have to remove any interior pieces to fit the piece.
The source marked this model as adult content.
This is a replacement seat belt guide for the Corbeau seat. STEP file included for edits.
Pretty much what the title says, its a seatbelt buckle/clip/plug to prevent the chime to go non stop, driving me mad This should only be used while going slowly, be responsible and use the seatbelt. i made it bc i live in a place were the…
🔒 Seatbelt Lock – Keep Kids Safely Buckled In This seatbelt lock is designed to prevent children from accidentally unfastening their seatbelt, providing an extra layer of safety during your car rides. I’ve made multiple revisions and…
Dieses multifunktionale Tool kombiniert zwei praktische Funktionen in einem einzigen Bauteil: Einkaufswagenlöser : Passend für die meisten Einkaufswagen mit Münzschloss Sitzadapter / Platzhalter : Die Rückseite ist geformt wie ein…
Car Make: BMW Car Model: Z3 Car Year: 2002 The bottom portion of the Seat Belt guide on the passenger seat broke off. The protruding finger broke and below the mount within the plastic. You have to remove the seat with all electronics and…
Prevent your child from unbuckleing its seatbelt while driving with this 100% 3D Printed Seatbelt cover.
Slip it into the female end of your seatbelt restraint system to silence the audible alarm.
Want to make a clip for to keep the seatbelt alarm from going off when I had items on the seat or my dog. Had a a couple different ideas and they both did work out without any issues. I would make out of PC, ABS, ASA, or something…
The model will be flush when pushed in.
A lot of vehicles out there have the issue with the seatbelts (especially the rears) flapping and clapping against the plastic trim or the seat when the windows are open and they are unbuckled. This model was designed for my 2026 Ford…
This is a replacement seatbelt hook for a MK3 Toyota Supra. The original part on my car broke, and the only one I could find on eBay at the time was $120, so I decided to try making my own instead. It's not the prettiest part ever, this…
![Seatbelt Plug, Belt Alarm Stop, Tesla, No logo [Remixed]](https://media.printables.com/media/prints/1098391/images/8302239_f03ae407-f1e8-49ca-ab82-2575d4ba433e_af41b276-831d-4336-8e4c-f481f3b75f0e/pxl_20240823_185820490201.webp)
