Reverse Attachment Clip for Solidremote TX-134
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clip to attach Solidremote TX-134 to sun visor for garage door opener use. Reversed for optimal direction.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 53
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Public Domain
The clip holds a Solidremote TX-134 to attach to a sun visor for garage door opener use. The remote points forward for optimal signal to the garage door opener receiver.
I have included the files for the looser version as well as the more secure "permanent" clip. The only difference is the clips that hold the remote in place are tighter and there as an additional tab that interlocks with the keyring hole on the remote. It is a quite snug fit but once you get the clip on there it's not going to fall out.
Use the file "clip_rev_tight" for the more permanent mount.
Use the file "clip_rev_loose" if you want to be able to easily remove the remote from the clip frequently.
I suggest using a little heat from a heat gun on the back of the visor clip to get it to custom fit your sun visor.