Universal Corner Headset Hanger (Tool-Free)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keep your desk clutter-free with this minimalist, slide-on headphone hanger.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Universal Corner Headset Hanger (Tool-Free)
Keep your desk clutter-free with this minimalist, slide-on headphone hanger. Designed specifically to sit securely on the corner of your computer monitor, it requires zero tools, zero screws, and zero adhesives.
Key Features
Plug & Play: Simply slide it onto the top corner of your monitor and you're ready to go.
Integrated Ribbing: The internal structure is designed to provide a firm grip while distributing pressure evenly across the frame.
Sleek Aesthetic: Low-profile design that complements any modern gaming or office setup.
Safe for Hardware: No sticky residue or permanent modifications to your screen.
Sizing & Scaling Guide
The original model is designed for a monitor bezel/corner thickness of 11 mm.
Since monitor thicknesses vary, you can easily adapt this to your specific hardware using the Uniform Scale tool in your slicer (Bambu Studio, Orca Slicer, etc.).
How to calculate your scale:
To find your required percentage, use the following formula:
Example: If your monitor is 15 mm thick:
(15 / 11) * 100 = 136%
Recommended Print Settings
Material: PLA for most setups. Use PETG if your monitor runs particularly hot or sits in direct sunlight.
Wall Loops: 3–4 (Essential for the structural integrity of the hook).
Infill: 15–20% (Gyroid or Grid recommended).
Supports: Tree Supports are recommended for the overhanging hook section to ensure a clean finish.