DFRobot 1602 LCD display w/keypad template
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A template to locate the cutouts needed when mounting a DFRobot Gravity: 1602 LCD Keypad Shield For Arduino.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
My latest project used this great display from DFRobot (there are clones) and I spent some time getting the holes lined up for the display and the buttons, so I thought I'd share the template. Use this in your own design to get things mounted right.
Note - The top mounted rows of pins may need to be removed (or moved to the bottom side) from the board to have enough room for the keypad buttons to protrude from the printed mount. Also, the $4 clone of these boards uses very short buttons whereas the original uses tall buttons, so plan accordingly.
Another note - When I mounted the display, I used 3m x10 SHCS and placed the nuts between the display board and the carrier board. I also used several nylon washers to adjust the mount height. See pic.