Crossgun turbo fan, nozzle & vacuum gridfinity bin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3x5 gridfinity bin for the crossgun turbo fan, its nozzle and its vacuum attachment.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
A 3x5x8U Gridfinity bin that holds the crossgun mini jetfan, its nozzle and its vacuum attachment.
Printing
I printed this on a Prusa Core One + using a generic PLA.
I used a 0.6mm nozzle to print it, as it doesn't have any fine detail.
I used a 10% gyroid infill.
Notes:
I used AI to help create this model.
The fit of the vacuum attachment is a bit tight for me, not problematically but tighter than the other two holes.
This model was designed using a CadQuery script. Every dimension traces to a physical measurement and sits at the top of the file, so you can adjust for a different accessory set, change the height in units, or retune the clearances without remodelling anything. If there is demand for this file, just let me know.