Crossgun turbo fan, nozzle & vacuum gridfinity bin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3x5 gridfinity bin for the crossgun turbo fan, its nozzle and its vacuum attachment.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 61
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
A 3x5x8U Gridfinity bin that holds the crossgun mini jetfan, its nozzle and its vacuum attachment.
Printing
I printed this on a Prusa Core One + using a generic PLA.
I used a 0.6mm nozzle to print it, as it doesn't have any fine detail.
I used a 10% gyroid infill.
Notes:
I used AI to help create this model.
The fit of the vacuum attachment is a bit tight for me, not problematically but tighter than the other two holes.
This model was designed using a CadQuery script. Every dimension traces to a physical measurement and sits at the top of the file, so you can adjust for a different accessory set, change the height in units, or retune the clearances without remodelling anything. If there is demand for this file, just let me know.