Solar Eclipse Glasses Frame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Glasses frame to watch a solar eclipse with, make sure to use appropirate filter!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
DISCLAIMER: Make sure to use an appropriate filter!
Filter need to comply to at least ISO 12312-2 or similar, I used these:
Solar Filter Sheet 210 x 210 mm for Telescopes, Binoculars & Cameras - DIY Solar Film for Sunspot & Eclipse Observation - Absolute Eclipse, OD 5.6, ISO 12312-2 Tested : Amazon.de: Electronics & Photo
I designed my own frame for the recent solar eclipse.
You need:
1x front part
2x frame part
1x arm part
1x arm part, mirrored in the slicer (normally x axis)
2x M2x12 screw
2x small filter sheet with 3.3cm x 4.8cm
Assembly:
Print the parts
Cut the filter sheets with the dimensions listed above
Place cut filter sheets in the front part (read the filter manual for the correct orientation, in the linked filter I used the silver side needs to face the sun)
The frames have thin chamfers on the longer side.
Easiest way to insert them is to start with the lower side, then press the upper side into place, see the frame placement pictureAttach the arms with the two screws
Depending on your head size, you can scale the arm lenth