Magic Faucet with flowing water
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An actual magic faucet with actual flowing water! Parts needed: Cup of 95mm diameter, at least 50mm deep. Pump e.g.…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 70
- Wydruki
- 1
- Wyświetlenia
- 778
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial
Anactual magic faucet with actual flowing water!
Parts needed:
Cup of 95mm diameter, at least 50mm deep.
50mm or so of 6-7.5mm ID tubing.
Power supply: 3V for a trickle, 6V for enough, 9V for plenty.
Faucet parts from http://www.thingiverse.com/thing:1013290
Water.
You can scale the water's height up as much as you like in your slicer, but more height needs more voltage.
Print Settings
Printer:
Zonestar D810
Rafts:
No
Supports:
No
Notes:
Water resolution isn't critical.
This "water" is the same outward shape as the original... I imported the original STL to OnShape (via FreeCAD) then modded it. I've added a 5mm tube up the middle and some outlets at the top, and a connection for the hose from the pump. Also cropped the bottom to a 95mm circle.
You can find it at Onshape.com https://cad.onshape.com/documents/58896918a2a409103bb04a27/w/99e7c356e599975a2d2e4b8a/e/2835fc9045adc9b960058160
If that link doesn't work, search public documents there for "magic faucet water"
Category: Sculptures