Magic Faucet with flowing water
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An actual magic faucet with actual flowing water! Parts needed: Cup of 95mm diameter, at least 50mm deep. Pump e.g.…
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 70
- Makes
- 1
- Views
- 780
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial
Anactual magic faucet with actual flowing water!
Parts needed:
Cup of 95mm diameter, at least 50mm deep.
50mm or so of 6-7.5mm ID tubing.
Power supply: 3V for a trickle, 6V for enough, 9V for plenty.
Faucet parts from http://www.thingiverse.com/thing:1013290
Water.
You can scale the water's height up as much as you like in your slicer, but more height needs more voltage.
Print Settings
Printer:
Zonestar D810
Rafts:
No
Supports:
No
Notes:
Water resolution isn't critical.
This "water" is the same outward shape as the original... I imported the original STL to OnShape (via FreeCAD) then modded it. I've added a 5mm tube up the middle and some outlets at the top, and a connection for the hose from the pump. Also cropped the bottom to a 95mm circle.
You can find it at Onshape.com https://cad.onshape.com/documents/58896918a2a409103bb04a27/w/99e7c356e599975a2d2e4b8a/e/2835fc9045adc9b960058160
If that link doesn't work, search public documents there for "magic faucet water"
Category: Sculptures