1 / 3
Sony FX6 - Lightweight Monitor Extension Arm — zdjęcie 1
1 / 3

Sony FX6 - Lightweight Monitor Extension Arm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Move your FX6 screen forward for perfect shoulder recoil balance. Ultra-light honeycomb design optimized for metal print

Ocena
0 / 5
Polubienia
9
Pobrania
30
Wydruki
0
Wyświetlenia
171
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial

The Problem: To get the perfect center of gravity for a shoulder rig (a "recoil" setup), the camera body needs to sit further back on your shoulder. When you do this on the Sony FX6, the stock monitor ends up too close to your face, making it impossible to focus or operate comfortably without a heavy third-party EVF.

The Solution: This Lightweight Monitor Extension Arm seamlessly integrates with the stock Sony screen bracket, pushing the monitor forward to the ideal viewing distance.

Designed for "Light is Right": I spend full days carrying cameras, so every gram matters. I designed this extension arm with a hexagonal lattice pattern. It provides maximum structural rigidity while keeping the weight strictly to a minimum.

Printing Recommendations: This part is specifically optimized for Metal 3D printing, yielding a beautiful, indestructible, and ultra-light piece of gear. Regular FDM printing is not recommended and have not been tested for this product.

For info the final product is 15mm longer than the one you see on the picture. I made that final design after the feedback from the other cameraman that have used the product.

Note: This part is a key component of my "Ultralight FX6 Fast Recoil Rig" ecosystem. Check out my collection for the ARRI Rosette Adapter and the Flexible Shoulder Pad to complete the setup!

Tagi