Mag Mount Phone Camera Cinema Rig UPDATED 9.24.2026
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mag Mount Phone Camera Cinema Rig with thread feature for standard Camera Features UPDATE: 2nd Fastener On Handle
- Ocena
- 5 / 5
- Polubienia
- 363
- Pobrania
- 376
- Wydruki
- 0
- Wyświetlenia
- 5661
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
UPDATE: 9.24.2026
From feedback from others and person use, the handles were bending with just one fastener in the center. So updated the Main Frame & Handle with 2 1/4"-20 Socket Head Screw Fasteners to eliminate the handle flexing. No more tape :)
I've also included some images with an exploded view of the assembly with the Bill of Materials. Let me know if you have any questions and I'd be more than happy to expand or help modify the files.
Thank you for your support.
Original Notes:
Most phone camera rigs use a "Clamp" style for mounting the phones. I was working an event where I needed to remove my phone often so I took advantage of the mag mount on the back of my phone. It's solid and secure and easily to remove. I used taper heat inserts which are standard for camera accessories so if people want to add lights, mic, battery, etc it's ready for it. I use a standard iPhone17 so I'm not sure if a Max would interfere but i can adjust for those that would like it. I added some tape on the top mounting areas of the handles. I should have added another hole feature but the tape has been working great. When holding with one hand, the handle flexed so that is a future upgrade that has been noted :)
Below is the list of material that I bought:
Magnetic Tripod Mount Adatper: https://bit.ly/4bQuSxT
1/4" Male to 1/4" Male Tripod Screw: https://bit.ly/3UhPdG9
Brass Taper Heat Insert, 1/4"-20: https://bit.ly/4ghvttH
1/4"-20 Socket head screw, 3/8"-1/2" Length