Top mount for Sovol SH03 on Elegoo Centauri Carbon 2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a top mount/riser for a Sovol SH03 filament dryer on an Elegoo Centauri Carbon 2 (without Canvas).
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 325
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is a riser for the Elegoo Centauri Carbon 2, with the intent to mount a Sovol SH03 on top. The bottom part could also be printed on it's own and combined with other top holders.
It grabs the CC2 from the inside and outside edge, so it sits very sturdy, and the SH03 slots into it from the top, maching the feet and screw holes, so it should be a tight fit, too.
There is enough space to insert or remove the glass plate from the front.
Parts mostly snap together or are held by the CC2/SH03, but gluing them is still recommended.
This is my first bigger model, made with OpenSCAD (bottom part) and Fusion (top part).
I'm sure there are still improvements to make to it, so remix away :)