1 / 1
Tapo D230 Wall Box Adapter Plate (60mm Round Back Box) — zdjęcie 1

Tapo D230 Wall Box Adapter Plate (60mm Round Back Box)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter plate for mounting the Tapo D230 doorbell to a 60mm round back box

Ocena
0 / 5
Polubienia
0
Pobrania
5
Wydruki
0
Wyświetlenia
73
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Share Alike

Tapo D230 Wall Box Adapter Plate

The Tapo D230 ships with a mounting plate designed for flat walls and plastic anchors. If you have a flush-mounted round back box (60 mm, the European standard) sitting where the doorbell should go, there is nothing to screw into — just a hole. This plate bridges that gap.

It screws directly to the back box lugs, covers the opening, and gives the doorbell's own mounting plate a solid flat surface to sit on.

You'll need a short self-tapping screw or a heat insert to attach tapo's bracket to this adapter and two standard electrical box screws to attach this to the wall.

There is a channel for a rubber (or TPU printed) seal at the back of the adapter, but I haven't had a chance to print that one yet.

Tagi