Ridgid NXT Shop Vac to 2.5'' Flex Hose Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Secure, clamp-free threaded adapter connecting a 2.5-inch flexible hose directly to your Ridgid shop vac.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Upgrade your workshop cleanup setup with this custom-designed, clamp-free adapter for Ridgid NXT shop vacs. May work for other shop vacs too.
Secure Fit: One end features integrated threads designed to screw tightly into a 2.5-inch flex hose, eliminating the need for clumsy hose clamps. The other end slips smoothly and snugly into the shop vac port.
Smart Two-Part Design: The model is split into two interlocking pieces. This allows both parts to be printed flat on the bed with zero supports required, resulting in a cleaner finish and a tight, glue-ready mechanical joint.
Dimensions
Upper Section: OD = 2.175" (with a slight taper) | ID = 1.9" | Length = 1.3375"
Lower Section: OD = 2.456" | ID = 1.9" | Length = 1.075"
Thread OD: 2.628"
Stop Flange: OD = 3" | ID = 2.87" | Depth = 0.315"
Total Height: 2.4125"
Recommended Print Settings
To achieve maximum structural integrity—especially important if your setup handles heavy rubber hoses or extension cords—use the following settings:
Orientation: Print both parts flat on the print bed (threaded end pointing up). No supports needed.
Material: PETG or ABS/ASA highly recommended for workshop durability, toughness, and impact resistance. (PLA can work, but may creep or warp over time under constant tension or high garage/workshop temperatures).
Layer Height: 0.12mm to 0.20mm
Infill: 20% or higher (Gyroid or Grid pattern recommended)
Wall Loops / Perimeters: 4 or more walls. (Note: Extra perimeters add significantly more structural strength to functional threaded parts than high infill percentages alone).
Explore More Workshop Upgrades
Browse my full catalog of custom adapters, dust collection fittings, and workshop jigs here:
Workshop Tools and Jigs: https://www.printables.com/@DPs_Designs_4882792/collections/3599922
Workshop Dust Collection Fittings: https://www.printables.com/@DPs_Designs_4882792/collections/3599928