1 / 9
Notre-Dame Basilica of Montreal - Quebec, Canada — zdjęcie 1
1 / 9

Notre-Dame Basilica of Montreal - Quebec, Canada

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

🇨🇦 Easy to print model of a famous historical church in Montréal. No supports.

Ocena
0 / 5
Polubienia
8
Pobrania
28
Wydruki
0
Wyświetlenia
254
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

🇨🇦 Bienvenue à Montréal! 
Welcome to Montreal!


NOTICE: Selling the files or physical prints of this model is forbidden by license. Only subscribers of our Reseller Program are allowed commercial uses.
Avoid a suspension or closing of your online shop if reported and caught infringing. 

This model was created by Dany Sánchez.

The Basílica of Our Lady of Montreal (French: Basilique Notre-Dame de Montréal), is a minor basilica of the Catholic Church in historic Old Montreal, facing the Place D'Armes square.

In the mid 1600's, an initial church dedicated to Mary was built on the current site. By 1824, there was need for a much larger building, so Irish-American architect James O'Donnell was commissioned to design one that could accommodate up to 10,000 people. O'Donnell designed it in Gothic Revival style. At the time of its completion around 1865, it was the largest church in North America, and remained so for 50 years. 

Since 2017, it is under restoration. It receives 11 million visitors per year, one million less than Notre-Dame de Paris.

Notre-Dame de Montreal has been voted 6th most beautiful in the world; the list included Notre-Dame de Paris as second and the Sagrada Familia as first. (from Wikipedia).

MiniWorld3D is happy to bring this historical model to life as a homage to the people of Montréal. Please give credit, it's all about spreading culture! 

If you appreciate our work and if you'd like to have a license to sell prints of this, please join our Printables Club or Patreon!

printables.com/@MiniWorld3D
patreon.com/MiniWorld3D

Find all our profiles, YouTube channel & social media on:

linktr.ee/miniworld3d

Join our 40K followers on IG!

instagram.com/miniworld3d
 

MiniWorld3D is building the best catalog of 3D printable models of landmarks of the world since 2014. More than 70 designers and 3D artists have contributed. 

Image credits: Print photos by Dr. Peter Lau of Makerwiz . Real location photo by Dany Sanchez. 


Printing Tips

No supports. There are some overhangs and bridges, but modern printers with high speeds, input shaper and good cooling can handle them fine. Adding supports could not improve anything and instead add difficulty and print time/material. 

Infill 15% , lightning pattern ok.

You can also try printing it at 0% infill (completely hollow), with no bottom layer and one perimeter (wall) to use as a lamp. Include brims if you do this. 

Tagi