Duplo/Lillabo bridge bricks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yet another version of bricks to create bridges with IKEA Lillabo tracks and DUPLO bricks. Designed for an inclination…
- Ocena
- 4,786 / 5
- Polubienia
- 107
- Pobrania
- 714
- Wydruki
- 12
- Wyświetlenia
- 3620
- Oceny
- 14
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution
Yet another version of bricks to create bridges with IKEA Lillabo tracks and DUPLO bricks.
Designed for an inclination of 2 DUPLO heights / 20cm track.
Floor->Slope (bottom)
Slope->Slope (middle)
Slope->Bridge (top)
Bridge->Bridge (straight)
Includes versions for both directions (left/right).
Prints without support.
NOTE: There is one point, where the train body touch the track, when going between flat and slope. See photo. Only slightly, and you don't notice when just rolling the train down the slope (it is not getting stuck or anything).
Not tested with Brio tracks.
Not tested with IKEAs motorized locomotive.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
10
Filament: 3DE Max PLA
Category: Construction Toys