Ugreen 7-Port USB 3.0 Hub (CM481) Under Desk Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket to hold the USB hub under the desk or secure it anywhere in place with 4 small wood screws.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 72
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Basic holder for Green USB-C to a 7-port USB A 3.0 hub, model no. CM481
Will keep it from moving around. Specifically made it for size #8, 3/4" screws, but any small screws will work. Files included are the complete pair and each ends separately. If your printer is good enough, you can print with no support. I used organic supports for the screw holes to make sure, 10-15% infill is all it needs. The hub is not heavy, so it does not need to be super strong. I used PLA for mine.
Hope you find it useful. Leave a comment on how it goes.